With four generations and 100+ years of structural masonry heritage, DiBara Masonry builds code-compliant property line and boundary walls across Los Angeles, resolving height limits, shared-wall agreements, and drainage easements so neighbors and permits stay settled long after the wall goes up.
With more than 4,300 projects completed, we showcase a selection of our masonry wall work, from privacy and boundary walls to block and stucco screen walls built for Los Angeles lots of every shape and grade.
Each wall is built with care, precision, and durability in mind, serving homeowners across Hollywood Hills, Laurel Canyon, Bel Air, Silver Lake, Pacific Palisades, and surrounding neighborhoods.
“They restored our historic building better than we imagined – true craftsmen!”
Tell us about your boundary wall project, we’ll provide a detailed quote at no cost or obligation.
We make it simple to start. Schedule a quick virtual consultation with our team, and you’ll receive a personalized estimate tailored to your property, completely free of charge.
With more than 4,300 structural projects completed across Southern California, our crews build masonry boundary walls, privacy walls, and shared property-line walls for homeowners and small developers across Los Angeles, operating under active California State License CSLB #1002003.
We coordinate surveys, height-limit compliance, and, where needed, shared-wall agreements with neighboring property owners before laying the first block, so the finished wall does not become a future dispute or code violation. Get in touch with us today to schedule a free estimate for your boundary wall project.
A property line wall over the standard height limit, built on a slope, or shared between two lots involves zoning setbacks, drainage easements, and sometimes a licensed surveyor, not just a fence installer. DiBara Masonry, operating under CSLB License #1002003 (C-29 Masonry classification) along with approximately 5 additional trade licenses, handles the structural and permit side that a typical fence company cannot.
Every boundary wall project is reviewed by a fourth-generation mason for height-limit compliance and drainage impact on both properties, reducing the chance of a neighbor dispute or a stop-work order after construction begins. You can verify our license status, classification, and bond at any time on the Contractors State License Board website.
Residential fences and walls in Los Angeles are generally limited to 6 feet in rear and side yards and lower in front yards, though the exact figure varies by zone and lot. The governing rules sit in the Los Angeles Municipal Code zoning provisions, and engineered walls can sometimes exceed the standard limit with an approved LADBS plan check.
Walls under 6 feet in most residential zones typically do not require an LADBS permit unless they retain soil or sit on a slope. Taller walls, walls in hillside zones, and walls that also function as retaining structures generally do, and our LADBS permit team prepares the structural details and handles the submittal when one is needed.
Every lot and neighbor situation is different, so we scope each boundary wall around the survey, the zoning limits, and how the wall will be finished on both sides. Our boundary wall services include:
For decorative block, smooth stucco, or stone-veneer finishes, see our architectural masonry options, and our block wall construction page covers reinforced CMU wall details.
A boundary wall marks and screens a property line, and its design is driven by zoning, height limits, and neighbor agreements rather than soil engineering. If your wall also holds back soil on a slope, see our Retaining Wall services in Los Angeles, since a wall that retains earth is designed, permitted, and inspected as a structural retaining system.
Some projects are both: a stepped wall on a sloped lot line can retain soil at its base and act as a privacy wall above it. In those cases we design the lower retaining portion to engineering standards and the upper screen portion to the zoning limits, and our guide to retaining walls on the property line explains how responsibility is typically split between neighbors.
A solid wall built across a natural drainage path can redirect water onto a neighbor’s property, which can create liability. We assess drainage patterns during the survey phase and include weep holes or drainage channels in the design where needed, following the same site-drainage approach detailed on our drainage and sitework page.
For shared walls, we recommend documenting a maintenance agreement at the time of construction so both owners know who handles repairs later. Four generations of family-owned masonry experience and 4,350+ completed projects across Los Angeles stand behind every wall we build.
Contact us today for your free virtual consultation! You may also check our recent masonry projects here.
Residential fences and walls are generally limited to 6 feet in rear and side yards and lower in front yards, though this varies by zone and can be higher with an approved plan check for engineered walls. We confirm the exact limit for your property before designing the wall.
For a wall built exactly on the line and shared by both properties, yes, a shared-wall or party-wall agreement is standard practice. If the wall sits entirely on your side of the line, you generally don’t need permission, but written notice avoids future disputes.
Absent a different written agreement, both property owners typically share responsibility for maintaining a wall built directly on the line. We recommend documenting a maintenance agreement at the time of construction to avoid ambiguity later.
Yes. A solid wall built across a natural drainage path can redirect water onto a neighbor’s property, which can create liability. We assess drainage patterns during the survey phase and can include weep holes or drainage channels in the design where needed.
Walls under 6 feet in most residential zones typically do not require an LADBS permit unless they retain soil or sit on a slope, but taller walls, walls in hillside zones, or walls that also function as retaining structures generally do.
Often yes, especially if the footing is intact and the lean is from age rather than an active drainage or soil problem. We evaluate the footing and lean angle before recommending a repair versus a full rebuild.
If the property line isn’t clearly established by recorded survey markers, yes. A licensed land surveyor confirms the line so the wall isn’t built on the neighbor’s land, one of the most common sources of boundary disputes. We coordinate the survey as part of our first project step.
Reinforced concrete block (CMU) is the most common choice because it is durable, fire-resistant, and accepts stucco, stone veneer, or decorative block finishes. Brick and split-face block are also options when the wall needs to match the home. We recommend a material based on height, exposure, and the finish you want on each side.
A boundary wall marks or screens a property line and is governed mainly by zoning and height limits. A retaining wall holds back soil and is designed as an engineered structure. If your wall does both, the retaining portion follows the engineering and permit rules covered on our retaining walls in Los Angeles page.
Build time depends on the wall’s length, height, and finish. The survey, any neighbor agreement, and permit review often take longer than construction itself, so we include a project-specific timeline in the proposal we send within 72 hours of the site visit.
Sometimes. An extension depends on whether the existing footing and reinforcement can carry the extra height and whether the new total stays within the limit for your zone. We check the footing and rebar before quoting an extension, and recommend a rebuild when the original wall cannot safely support it.
Meet DiBara Masonry, the 4th generation masonry and concrete experts that have been restoring brick, stone, & concrete structures for over 100 years!
